MyPlasmaCutting.com
by Fred Nelson Fabrication
GIANT steel steam punk style floor lamp
To buy the dxf file click here.
Material Required:
48 x 96 inch 1/4 plate, 12 x 80 inch 11 ga, 32 x 38 inch 3/16 plate
98 inches tall when fully extended and used with the pedestal base. The first 2 photos show some laser cut plastic discs, springs, and an old refrigerator light bulb added. Personally, I like it best without the plastic discs and a larger 'Edison bulb' instead. If you want the dxf files for the discs, contact me after you purchase the lamp dxf file and I will forward the plastic cutting files (laser).
The large hardware is all 1/2 inch. Start with a long length of 1/2 inch 'all thread' (threaded rod) and cut pieces to length as needed.
There is a lot of 1 inch diameter tubing used. Start with a long length of 1 inch tubing and cut pieces to length as needed.
** Edison style bulb. Available at Home Depot
CONTACT US PHOTO GALLERY ONLINE STORE PLASMA CUTTING CUSTOMER SUBMITTED PHOTOS LASER CUTTING
Fred Nelson Fabrication 1999-present Azusa, CA 91702. All rights reserved.