MyPlasmaCutting.com  by Fred Nelson Fabrication

We generally do not provide quotes via telephone. Instead, email us at   MyPlasmaCutting@gmail.com

If you are interested in one of our existing products: First, check our online store for automated check-out.

 Plasma cutting: $100 minimum.  Steel or aluminum (no exotic alloys). Cutting ranges from $3.25 to $4.45 per minute.  Cut speeds vary and range from 12 to 90 inches per minute. We can accommodate materials as thick as 1/2 inch or as thin as 20 gage and everything in between. Email us your specifications and requirements including any drawings or sketches. If your order requires shipping provide your zip code.

  Laser cutting: $100 minimum. Wood, low formaldehyde MDF, common plastics, and other non-ferrous non-toxic materials up to 3/8 inch thick (no Lexan). Cutting rate $3.25 per minute.  Cut speeds vary and range from 5 to 100 mm per second. Email us your specifications and requirements including any drawings or sketches. If your order requires shipping provide your zip code.

CAD drawings:  Design or CAD work is quoted on a case by case basis.

Contact us by email: MyPlasmaCutting@gmail.com

Fred Nelson Fabrication  850 W. Foothill Blvd  Ste 23  Azusa, CA 91702 USA

Will-call hours for local pick-up are 2pm-8pm M-F by appointment.

 
View Larger Map
 

RETURN HOME